Roll of the dice on a YZF 600 R/R?
 

I haven't cross-referenced it yet, but off-hand can anyone tell me if the reg/rectifier off a 2005 YZF 600 would work on the Supe? I just scored one off the bay for under $25. It looks just like the one off of an R6, but that is just what it looks like... I couldn't tell if it was 5 wire, but it sure looked like it... Hope it works... I just jumped on it and bought it!

Maybe PM Tweety. He seems to know his shizzle on electrics.

From Regulatorrectifier.com:

NEW OEM YAMAHA REGULATOR RECTIFIER ASSY OEM # 4JH-81960-01-00 FITS

FZR600 FZR 600 1995, 1996, 1997, 1998, 1999

YZF600 YZF 600 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005

YZFR6 YZF R6 1999, 2000, 2001, 2002

YZFR6 YZF R6 S CHAMPIONS 2001

YZF1000 YZF 1000 R 1998

YZFR1 YZF R1 N 1999, 2000, 2001

YZFR1 YZF R1 S CHAMPIONS 2001

SHINDINGEN # SH650A-12

So I guess if people are using the r/r from r6's, this looks like it should work... I will let ya know for sure. I know it is a 5 wire for sure now, too. Nothings wrong with my stocker, by the way, I am just gonna put this in as cheap insurance against a future failure keeping the stocker as a backup... or maybe fleabay it...

my guess is no. the only yamaha rr that the hawk can use are from pre-fuel injected R1's. it can't have fuel injection or its a whole different ballgame. at least that was the concensus when I had to get a new rr.

Well in the link thats in the r/r swap sticky, the guy uses a 2000 model r1 r/r and mentions that r6's use the same unit... I know thats NOT a 2005, but the link on regulatorrectifier.com says that its compatible with 2000 r6's so I am making an assumption without knowledge or access to microfiches or anything of that sort... It will be here tomorrow so I will know for sure how many wires it has, I think thats the real key to it being able to work.

OK. Got it today, it's a 5 wire job... Should work, no? Is it true, a fuel injected bike would make this job different?

OKAY I am an idiot... The sticky in the knowledge base shows my answer... Moderator if you want go ahead and delete this entire post, please!
Its the same part # as the one in the swap in the first link.

I replaced the OEM with an R/R from a 2007 R6. Five wires and exactly the same procedure as is put in knowledge base sticky by hawkrider. It works great!