RC51's front brake master cylinder p/n ?
guys,
sourcing RC51 front calipers and master cylinder for my '97 vtr 1000f. found the calipers (year info pending). trying to identify the correct master cylinder p/n to procure and a source if anyone has one (used). ebay stuff seems to be thrashed or misrepresented based on people's comments. i recall seeing a reference to an online source for p/n's today during my hours of reading the forums here. but for life of me didn't record it. all a bit fuzzy now.... help ? RC51 front brake master cylinder p/n ? I believe the calipers are rc51 calipers p/n 45150-MCF-D31 . would year pertain to effectivity for my '97 ? recall the 97-04 VTR's are pretty much the same for components. any assistance greatly appreciated, james |
Hey James, Pm'd you again. Ronayers.com's microfiche will give you any part #'s you need. They show the same part #'s for all years for the RC51 for both the calipers and m/c.
|
SP-1s used a larger MC and calipers (same as 929) while the SP-2s used slightly smaller MC and caliper piston sizes (thought they look outwardly the same); same set-up as the 954.
|
Front Brake MC/Callliper size differences
guys,
Here is what I found in respective year mfgr repair manuals for the bikes. From all the forum research I have done, I presume the improvements for the front brakes are increasing the size of the MC & Calliper pistons (RC51's more surface area) over the smaller diameter (RTV/VTR's) used on the early years mfgr. 2000-2006 Caliper OD 33.878 (1.338) and 31.948 (1.2578) Master cylinder ID 19.05 (.750) 1997-2003 Caliper OD 30.148 (1.1869) and 26.918 (1.0598) Master cylinder ID 14.00 (.5512) So as an improvement to my '97 vtr I am sourcing the RC51 (SP1 / SP2)MC/Calliper's with larger dimensions. |
All times are GMT -7. The time now is 04:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands