EnKei 3 spoke wheels anyone?
02-23-2018, 09:43 AM
#2
Administrator
MotoGP
Join Date: Apr 2006
Location: Kempner, TX
Posts: 4,402
02-23-2018, 08:43 PM
#4
Junior Member
Squid
Thread Starter
Join Date: Feb 2018
Posts: 9
It gets better. The rims have straight spokes and the front end apparently came from a GSXR. The rims are not stamped Honda or Suzuki and the rear disc is 5 bolt. Since I need to rebuild the motor because of the bent shift forks (just realized it today) I want to solve the little issues first. My goal is to fir the SV1000 fuel injection system on it but one thing at a time.
02-23-2018, 09:41 PM
#5
Senior Member
SuperBike
Join Date: Jul 2011
Location: South of Live Free or Die & North of Family Guy
Posts: 1,456
Fuel injection hmmm.... good luck with that, if you will figure a good way to make it work, please share here, I know many people contemplated that idea, including myself, some tried, but no one made it to work yet.
02-24-2018, 04:30 AM
#6
Administrator
MotoGP
Join Date: Apr 2006
Location: Kempner, TX
Posts: 4,402
It gets better. The rims have straight spokes and the front end apparently came from a GSXR. The rims are not stamped Honda or Suzuki and the rear disc is 5 bolt. Since I need to rebuild the motor because of the bent shift forks (just realized it today) I want to solve the little issues first. My goal is to fir the SV1000 fuel injection system on it but one thing at a time.
You said "5 bolt" so Im guessing rear disk not front..
Is it flat or dished?
What is the OD?
What is the MIN disk thickness listed on disk?
What is the disk diameter on the inner index circle (where the disk touches the hub and locates in centered on hub)
What is the bolt circle diameter (that one is a bit tricky to figure out as you cant just measure across point to point at center of bolt holes....this will get you close
Thread
Thread Starter
Forum
Replies
Last Post
inderocker
Modifications - Cosmetic
81
11-09-2009 06:59 PM
