Dan-Moto's on Jardine high-mount mids?
Anybody mount up a set of Dan-Moto cans to their existing Jardine high-mount mid pipes? They both use spring retention. I should be getting some black aluminum Jardines with high-mount mids soon (real cheap & used). Thought it might look cool to slap some Dan-Moto conical cans onto the high pipes.
|
Sorry I dont have an anwer for you but IF you try it let me know... I am thinking about having a fab shop make some hi mount mids for my dan moto cans.
|
Should work as long as the inner diameter of the danmoto cans is correct. Email danmoto and ask them to give you the inner diameter of the muffler inlet. As of the last time I asked Danmoto WILL sell just the mufflers, they will NOT sell just the midpipes.
Did you score those Jardines for cheap that were on ebay? |
Originally Posted by captainchaos
(Post 325130)
Should work as long as the inner diameter of the danmoto cans is correct. Email danmoto and ask them to give you the inner diameter of the muffler inlet.
As of the last time I asked Danmoto WILL sell just the mufflers, they will NOT sell just the midpipes. Did you score those Jardines for cheap that were on ebay? |
Cool. As of recently midpipes were still available from Jardine, but with the spring loop and no longer in chrome. I got a replacement for an older pair of the black powdercoat high mounts. Ground off the spring loop and wetsanded and polished the steel mid and it matches pretty well.
|
Originally Posted by captainchaos
(Post 325142)
As of recently midpipes were still available from Jardine, but with the spring loop and no longer in chrome.
|
Originally Posted by rz_racer_69
(Post 325145)
I sent an email to them asking if they would sell just a high-rise mid, some weeks ago, and never got a reply. :(
I've always spoken to them on the phone, try calling them. 800-347-8664 |
Originally Posted by rz_racer_69
(Post 324847)
Anybody mount up a set of Dan-Moto cans to their existing Jardine high-mount mid pipes? They both use spring retention. I should be getting some black aluminum Jardines with high-mount mids soon (real cheap & used). Thought it might look cool to slap some Dan-Moto conical cans onto the high pipes.
|
Originally Posted by Squid
(Post 325167)
I didnt even ask this but do you have Dan Moto cans or are you looking to buy some? If you are looking to buy some let me know and Ill run out and pull one off real quick and get you an I/D of the muffler.
Oh please please please! I need new cans for my bike. I dropped it a while back and was thinking about the Dan Moto route, but I want the high-mounts, and Dan Moto is a No Go. |
I'm still waiting to receive my pipes, but if you want to post the ID now that would be great. Or, for that matter, the OD of the DanMoto midpipe would be interesting too.
|
Originally Posted by msethhunter
(Post 325200)
Oh please please please! I need new cans for my bike. I dropped it a while back and was thinking about the Dan Moto route, but I want the high-mounts, and Dan Moto is a No Go.
|
I have a set of Titanium up mid pipes if anybody is interested pm me. I bought them before I bought my bike and lo and behold my bike already had them..go figure! It also has Lange mufflers that I can't wait to replace!
|
Alright, I know its not morning any more but here are the specs: Mid pipe O/D:1.985" / 50.43mm. Mid pipe I/D: 1.944" / 49.38mm and the Can I/D: 2.032" / 51.62mm. I hope this helps you out some. -Mike-
|
Great, thanks. HRCA#1, how about those Jardine midpipes? Can you get an OD measurement to see if the DanMoto cans will fit?
|
Originally Posted by rz_racer_69
(Post 325243)
Great, thanks. HRCA#1, how about those Jardine midpipes? Can you get an OD measurement to see if the DanMoto cans will fit?
|
So the OD of the Jardine midpipe matches the OD of the DanMoto midpipe. :)
|
My deal for the Jardine slip-ons fell through, and when I called Jardine, all they had to sell were their high-mount hangers in polished aluminum, but no mids. The guy I talked to did say they would make more if we got enough people to order them, 10. Luckily, HRCA#1 still had his for sale, so now I am looking to buy the DanMoto cans to go on them. May stick on some tore up D&D carbon cans I have laying around until then.
|
All times are GMT -7. The time now is 09:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands