Choke fitting replacement, brass made.
 

If you are looking for a solution for your plastic choke cable fittings, I may just have the cure. If they haven't broken yet, good for you, but, if they have, well I believe a brass made one will cure those broken blues...;O)

They are a perfect replica of the original one. Price is 39$, shipped to your door, but, there is a catch, it must be PayPaled as gift please.

For those of you who have already shown interest, I will PM you shortly.

If you're taking your carbs off and haven't replaced your stock plastic choke fittings, or if you are experiencing strange, intermittent carb issues - these are the ticket!


I chased jetting issues for months until I replaced my previous owner jerry rigged choke fittings. Sagging choke cables, poor fitting cable boots, sticking chokes - not good.

Nice work J!,
Those look tits.
BTW, I received my fuel screws yesterday.
Thanks,

Dan

You da' man once again!

pm'd & paypal'd:cool::cool::cool:

When does production start on needle jets?

P.M sent!

more (useful) shiny stuff from Jack Flash Inc.... :)

Well, like everything else in life, everybody wants some, but, they don't really want them when they're done.
So, after a few flakes, I have some of these left if anyone one else may be interested.

I'm not a flake. Got mine today. They're awesome.

Thanks J. FLASH.

:thumbsup:

Mine came in the mail today and they are beautiful. A very big "thank you" to Jack Flash for offering and supplying these.

I got mine and had them installed within minutes. Super easy and gives you a peace of mind. My old ones were so brittle and having replaced one of the plastic ones with another from a set of parts carbs, this made for very delicate carb removal and installation. Now, I can rip those suckers out of there, like startin' an old outboard!

Thanks again Mr. Flash :cool:

Maybe Jack can reproduce the HRC needles if someone were to send him one :)

James

Well, it sure would look cool made of brass! Might be a bit heavy though.

I'll volunteer a piece of aluminum for a test pilot :)

James

Making them would not be an issue. The issue is if you make them in aluminium, it needs to be treated with an anti friction. If you make them in brass, I don't believe weight would be such an issue, but, the wear factor will still be one.

Ahh, ha than titanium it is. (still needs a coating for friction and corrosion
protection. Something like DOW's Molykote Anti-Friction Coating that is a bonded, dry-film lubricant

Jack can you please set aside a set for me and put them in the same parcel as the fuel screws when made? I will then need to know your payment details thanks heaps.

If you have a set left I'd like one and will paypal as soon as you confirm. Thanks.

Fresh off the grill if needed.

Still available?

Yes they are. PM me if you want them.

Can I jump in on this action I'm in Australia,

Hi Jack

Whats the total cost of shipping (brass choke)to New Zealand. By the way thanks for the fuel screws ..... awesome

Chris

Fresh batch in if needed....:)

have you any more of these. im in bad need of a set:D

PM sent.

Jack, I need a set. Let me know how to take care if this.

New sets fresh off the CNC....;)

PM sent.