Modifications - Performance Discuss aftermarket and DIY performance modifications

CBR900rr front rotors?? Do they fit??

Thread Tools
 
Search this Thread
 
Old Nov 18, 2006 | 05:08 PM
  #1  
Randman's Avatar
Thread Starter
Moderate-whore
MotoGP
 
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
Randman is on a distinguished road
CBR900rr front rotors?? Do they fit??

Ok, so I thought the 900rr rotors fit the stock VTR wheel...hmm guess I was wrong, either that or I was sent the wrong rotors....Anyone, anyone....

TIA
Old Nov 18, 2006 | 05:25 PM
  #2  
Randman's Avatar
Thread Starter
Moderate-whore
MotoGP
 
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
Randman is on a distinguished road
bump
Old Nov 18, 2006 | 05:29 PM
  #3  
superhawk22's Avatar
Senior Member
MotoGP
 
Joined: Jan 2005
Posts: 3,844
From: Gainesville FLA.
superhawk22 is an unknown quantity at this point
I thought I read they did but I just checked ronayers and the #s are different, I also thought the VFR800 from '98 fit and those #s are different as well. The CBR600 F3 have the same #s so now I'm not sure about the others, anyone else?
Old Nov 18, 2006 | 05:34 PM
  #4  
Randman's Avatar
Thread Starter
Moderate-whore
MotoGP
 
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
Randman is on a distinguished road
Luckily they were pretty cheap so I can throw them back on ebay, I may just stick with the stock rotors...

Or if anyone needs rotors from a 94 cbr900rr with 6000 miles, they look like they are in real good shape...wish I could use them...$50.00 plus shipping for the pair...I'll put them on ebay next week sometime if noone wants them..
Old Nov 18, 2006 | 05:36 PM
  #5  
superhawk22's Avatar
Senior Member
MotoGP
 
Joined: Jan 2005
Posts: 3,844
From: Gainesville FLA.
superhawk22 is an unknown quantity at this point
The holes don't line up?
Old Nov 18, 2006 | 05:37 PM
  #6  
Randman's Avatar
Thread Starter
Moderate-whore
MotoGP
 
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
Randman is on a distinguished road
nope, seems the center is a little larger, making the holes not quit lineup
Old Nov 18, 2006 | 05:40 PM
  #7  
superhawk22's Avatar
Senior Member
MotoGP
 
Joined: Jan 2005
Posts: 3,844
From: Gainesville FLA.
superhawk22 is an unknown quantity at this point
Damn, I could've sworn I read they fit, do you know what year? Oh well the #s are different so I guess not but I could of sworn I read the other 2 worked.
Old Nov 18, 2006 | 05:44 PM
  #8  
Randman's Avatar
Thread Starter
Moderate-whore
MotoGP
 
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
Randman is on a distinguished road
I thought I read it somewhere too....oh yeah that was on here.....

No worries..I'll just pass them along to someone who can use them....
Old Nov 18, 2006 | 05:48 PM
  #9  
superhawk22's Avatar
Senior Member
MotoGP
 
Joined: Jan 2005
Posts: 3,844
From: Gainesville FLA.
superhawk22 is an unknown quantity at this point
I know just goes to show always triple check.
Old Nov 18, 2006 | 05:50 PM
  #10  
Randman's Avatar
Thread Starter
Moderate-whore
MotoGP
 
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
Randman is on a distinguished road
I figure the good info I have gotten out of you and others on here totally out weight the bad,,,,,:-D At least I didn't blow like $150 bucks or something!!!
Old Nov 18, 2006 | 10:58 PM
  #11  
Speed_Demon's Avatar
Senior Member
Superstock
 
Joined: Dec 2005
Posts: 428
Speed_Demon is an unknown quantity at this point
The first generation 900RR rotors will fit but the later 900's won't.
Old Nov 19, 2006 | 08:59 AM
  #12  
JamieDaugherty's Avatar
Senior Member
SuperBike
 
Joined: Aug 2005
Posts: 1,864
From: Fort Wayne, IN
JamieDaugherty is on a distinguished road
I thought the 94 was the first generation? I'm 99.9% certain they would work. Even the later ones will fit the wheel but are larger diameter (don't quote me on that one though).
Old Nov 19, 2006 | 10:56 AM
  #13  
slo1's Avatar
Senior Member
Back Marker
 
Joined: Aug 2006
Posts: 249
From: Utah
slo1 is on a distinguished road
this is actually from the 400grey forum, but should apply since the Shawk is listed as well. names are european, and some are not available here, but for what it's worth;

rotors that interchange

VFR400R all models 1989-1992
RVF400R all models 1994-1996
VFR750FR/FS/FT/FV 1994-1997
CBR600FS/FT/FV/FW 1995-1998
CBR400RRJ/RRK NC23 1987-1989
CBR400RRL/RRN NC29 1990-1994
CBR900RRR/RRS/RRT/RRV 1994-1997
VTR1000FV/FW/FX/FY/F1/F2/F3 1997-2003

Fit other bikes
1986 86 Nc23
92-93 Nc23
90-94 Nc29
89 Nc30
90-94 Nc30
94 - Nc35
95-98 Cbr600
98-99 cb600 Hornet
94-97 vfr750
94-97 fireblade

slo1
Old Nov 19, 2006 | 12:51 PM
  #14  
Randman's Avatar
Thread Starter
Moderate-whore
MotoGP
 
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
Randman is on a distinguished road
Yeah, No, since I have the 94' rotors here with me, and I have tried to change them out, I can tell you first hand that they don't fit>>>....

looking at the 95-97 cbr rotors, they look almost identical to the stock vtr rotors...
Old Nov 20, 2006 | 02:09 PM
  #15  
vitter's Avatar
Senior Member
Back Marker
 
Joined: Mar 2005
Posts: 200
From: Ottawa
vitter is an unknown quantity at this point
just get the proper bolt holes drilled and the center hole machined if it needs to be bigger. I had this done on my GSXR1100, and it worked fine.
Old Nov 20, 2006 | 03:08 PM
  #16  
Randman's Avatar
Thread Starter
Moderate-whore
MotoGP
 
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
Randman is on a distinguished road
too much to deal with...I will replace my current rotors (stock), I just have to find a good deal on some...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jeephawk
Classifieds
5
Aug 27, 2012 12:26 PM
pzurek18
General Discussion
0
Feb 26, 2009 08:41 PM
Randman
Classifieds
38
Dec 10, 2006 04:43 PM
Randman
Classifieds
3
Nov 20, 2006 07:14 PM
troy_v
General Discussion
1
Sep 21, 2005 10:59 PM




All times are GMT -7. The time now is 02:37 AM.