add 30 hp
Found this today.
http://jacksonville.craigslist.org/mcy/2051067143.html This might be a fun project for someone. The TL motors are rated at 130hp |
might as well got and look at the Hayabusa motors cuz fitting the TLR engine will be just as fun as trying to fit a Busa engine...
|
Hey, D.I.D> how you make out on the TLR? If you are not going after the steal, Would you consider being a middle, P.R. man.
I have a brother that collects suzuki bikes(step child,(kidding) and has been looking for one of those bikes... Please let me know... |
My engine is right now at 120'ish hp and soon it will be at 130'ish hp... And it already fit's the frame...
|
The TLR and TLS are setup different. Almost like the VTR and the RVT. I'd be really surprised if a TLR actually made 130hp. By the way, the VTR has the same bore and stroke of the TL, so with the same CR and cam profile it should be in the same hp ballpark. A piston and cam change is a whole lot easier than fabing a TL motor in a VTR.
|
Originally Posted by NooB
(Post 286316)
The TLR and TLS are setup different. Almost like the VTR and the RVT. I'd be really surprised if a TLR actually made 130hp. By the way, the VTR has the same bore and stroke of the TL, so with the same CR and cam profile it should be in the same hp ballpark. A piston and cam change is a whole lot easier than fabing a TL motor in a VTR.
|
Originally Posted by Tweety
(Post 286294)
My engine is right now at 120'ish hp and soon it will be at 130'ish hp... And it already fit's the frame...
Should note also that the fueling is near perfect, unlike the TLs which were reputed to suffer from abrupt fueling thanks to their early generation FI systems.... |
Originally Posted by mikstr
(Post 286369)
+1
Should note also that the fueling is near perfect, unlike the TLs which were reputed to suffer from abrupt fueling thanks to their early generation FI systems.... |
I'd rather try to fit a rc51 or 1098r engine
|
Got that swap in the works, I have heard of putting the RC-51 engine in the S-hawk frame, Yet i believe it would be easier to put a S-hawk engine in a NT650 hawk frame-which i know Honda America did(proto-type(VR980) of course.
|
Or buy a rc51 frame, engine, swingarm, wheels forks, subframe, and fairings.
|
Hey jus' Nick, your missing the point. I have two RC-51(2003 red, and 2006 black) and my 2001 Superhawk. I have all those components that you suggested and enough to do quite a few conversions- Yet if you read the thread- The thought was to put a Puzuki engine in a S-hawk. so i am confused with your suggestion..
|
It's sarcasm. A superhawk is a superhawk, why try adding a different engine?
|
it'll be interesting in a different engined VTR1000F to see where the swingarm goes....
|
Originally Posted by Wicky
(Post 287142)
it'll be interesting in a different engined VTR1000F to see where the swingarm goes....
|
Originally Posted by Just_Nick
(Post 287122)
It's sarcasm. A superhawk is a superhawk, why try adding a different engine?
On a side note I have wanted to take a 900SS CR and throw in a TL1000 or a superhawk engine. Sacraligious I know, but you would have the best of both worlds, Itallian beauty and honda or suzuki reliability. |
All times are GMT -7. The time now is 04:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands