SuperHawk Forum

SuperHawk Forum (https://www.superhawkforum.com/forums/)
-   Modifications - Cosmetic (https://www.superhawkforum.com/forums/modifications-cosmetic-34/)
-   -   Integrated Tail Light (https://www.superhawkforum.com/forums/modifications-cosmetic-34/integrated-tail-light-24073/)

Mattaua 10-21-2010 02:38 AM

Integrated Tail Light
 
Just a heads up for a good deal on an LED integrated. Might see if I can talk myself into one

http://www.d2moto.com/p-5013-1997-20...t-signals.aspx

Also did a coupon search. the coupon code "D2M2008" will get you an additional 15% off. Just placed my order for a total of $21.98!!

whozit 10-21-2010 03:08 AM

I bought one from them about 2 months ago and installed it. No problems.

ttocsmai 10-21-2010 01:05 PM

is it LED or regular light? I like the LED's that really light up the backend.

ttocsmai 10-21-2010 01:08 PM

:loser:okay, just put duh on my forehead. I just read it.

wyldryce 10-21-2010 04:42 PM

Thanks for the heads up! Just ordered mine...:)

smokinjoe73 10-21-2010 08:55 PM

I am probably the only rider who cares but is it bright? I did the LED conversion covered on some thread here & it was nice & "dont rear end me" bright. This looks like it would be to smokey to be visible.

motogomojo 10-21-2010 09:02 PM

Thanks for the heads up!Mine is on it's way:)
Can someone who has this set up report on the brightness factor?

NooB 10-21-2010 09:57 PM

I recognize those white rectangle resistors things, I used to have something similar on my SV. The LED's are usually a whole lot brighter than the bulbs, but those damn resistors suck. On my SV the blinkers blinked so fast that you couldn't tell the signal was on. I dunno, maybe it was just a pos suzuki. That's a damn good price, even if you stick with separate signals.

inderocker 10-21-2010 10:29 PM


Originally Posted by smokinjoe73 (Post 284887)
I am probably the only rider who cares but is it bright?.

Nope... even the clear lensed versions are not that bright. They really need to manufacture it where each LED has a chrome dish around it so it can reflect light outward (See 2nd gen SV650/1000).

saige 10-21-2010 10:34 PM

thats why when mine comes in,im doing the mod with the trailer light in it,which is only 15.70 at wal-mart,same one like in autozone or advance auto,its half the price :)

Mattaua 10-27-2010 06:35 AM

Just about an hour ago I ranted about not getting my product yet and poor communication by this company....cancel all that, mail just showed up and got my tail light!!!

smokinjoe73 10-27-2010 07:53 AM

OK guys, brightness report compared to stock? Someone's gotta speak up there charlie........

saige 10-27-2010 09:24 AM


Originally Posted by Mattaua (Post 285259)
Just about an hour ago I ranted about not getting my product yet and poor communication by this company....cancel all that, mail just showed up and got my tail light!!!

you got yours already :( i checked my status and am not getting mine until the 1st argggggg

saige 10-27-2010 09:25 AM

and i ordered the same day as you did,dammmmmm that sucks

Stevebis1 10-27-2010 09:25 AM

I don't have this one, mine was bought from another Ebay seller. They all may be made in the same Chinese factory, don't know.
In any case I have found FOCUS of the LED to be part of the brightness issue. For mine if you are in the focus zone, it is very bright. Outside of that zone it drops off considerably.
I got mine to help with the dificult to see turn signals on my undertail. I think the combination is safe but not sure I would want to depend on the turn signals of the integrated tail light alone.

whozit 10-27-2010 03:24 PM

"Brightness"
 
As Steve said, if you're in the "focus" area they are brighter than the stock, bulb-style tail light. LED's project a directional, focused, light unlike a standard filament bulb that emits all around it. As for the turn signals, the tail light I purchased from them has alternating amber LEDs with the red running or brake lights. As far as the resistors go, buy a digital flasher at the parts store for $13 and you don't have to deal with them.

Mattaua 10-27-2010 03:43 PM

Yeah I just had gsxr_rcr install my light this afternoon. The resistors were crap and we didn't use them. I'm just gonna pick up dig flasher later on. But for now here are the results:

http://www.youtube.com/watch?v=xSDLPI4iGTs

JPP 10-27-2010 04:07 PM

Timing is everything. Needed to address the removal of the stock flashers when I install my Devil Highmounts. Now i'm set. Waiting for winter to show up. 75 degrees here in NY. Lots of wet leaves mind you but still warm.


All times are GMT -7. The time now is 03:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands