help with flushmounts?
 

problems with the lp fronts they are the ones that are kind of triangular in shape .I really like the look so I will be bummed if they dont work. Every wire combo I try they blink fast I did a forum search but could not come up with enough info the wires from the signals are yellow and black no stripes. the package says blk=hot ,yell=grnd. any info would be great if not I guess thier going back.:(

I traded mine in for a three-wire version. Any chance you can exchange them?

possible?

the guy at gdl cycles says that any aftermarket light blink fast unless you get the relay is that necessary ? any thoughts

All flushmount/led turn sigs's will blink suped up honda civic fast unless a resister is installed, no????
I bought a model specific resister for my RR on Dennis Kirk a few years back. The led flush mount's went from super fast to regular speed............

Yes, the LEDs will blink faster without a resistor. You can find them on eBay.
Took me a bit to find them, but here they are.
http://cgi.ebay.com/ebaymotors/LED-T...mZ160066622579

Right, putting in a resistor will slow the blink down. But LP (or other blinker sellers) have three-wire versions of their turn signals that don't have this problem.

thanks guys I think Ill just let them blink a little faster as long as it wont hurt anything , Easier on the wallet:???:

I got a plug in replacement for the flasher relay. It was made by trickflasher and it has 6 different flash patterns. Pretty cool!!!! Only $20 on ebay if you look hard enough. Well worth it!! It even cures fast flash no matter what bulbs or leds you are using.

only led's should blink fast you did not mention if yours were led's? mine are lp's and blinked rapid when I hooked the wires up wrong have you tried to change the wires around?

they are led in the front and then just put some bike masters on the back and all is good as far as I know will post pics soon thanks all.