Cheap (or free) DIY tail pack
 

First off I'm used to having storage on my bike, not Goldwing storage but my last bike was a KLR650 with a Stanley FatMax toolbox bolted to the rear rack so less than two hours after bringing my Superhawk home I started thinking about storage and went from soft lunchboxes as saddlebags to spiderweb strapped bags on the tank and then this idea popped into my head...

What you'll need ...
- A fanny pack you can modify (so don't borrow one from someone, unless they owe you a few bucks)
- 4 large flat washers
- 2 small washers
- 2 screws that will fit into the mounting holes on the seat for the rear seat cover.

Now lets begin with a before picture.

Attachment 33189

Now the mounting holes where we'll mount the fanny pack which will from now forwards be referred to as a tail pack to avoid the mental image of an old bingo granny with a flamingo pink visor that the phrase "fanny pack" conjurers up. Got that in your head now? Good! Use that as your motivation and transform that granny pack into a tail pack!

Attachment 33190

Here's a closer look.

Attachment 33191

Now for the prep work you'll need to center the pack on the seat and figure out where to punch some holes in the strap or in my case the side pockets on the "tail pack".

Attachment 33192

Attachment 33193

Now that that's done lets look at the hardware needed and see how it comes together, the pictures should be self explanatory.

Attachment 33194

Attachment 33195
Attachment 33196

Attachment 33197

Attachment 33198

Attachment 33199

Attachment 33200

Tada! Now you might have to make a slight modification to the bike for the seat to close. The screw heads might contact the metal loops under the seat and they might need to be bent or tapped back a bit. After you're sure you got everything right you can trim the straps on the "tail pack".

Attachment 33201

I haven't found any harm in doing so but if anyone knows otherwise please let me know. Now here it is on the bike.

Attachment 33202

Even better is if the "tail pack" is expandable like so.

Attachment 33203

Overall it cost me nothing since I had everything on hand. But figure a few bucks for the hardware and I remember picking this pack up at the Salvation Army for less than $3 so it's quite cheap! I was able to fit a 7" tablet, 16oz travel mug, leather gloves, rag, face mask, multitool and a couple other small odds and ends in there.

The only "issue" I see is that there is supposed to be a set of hooks that mount in those holes which engage those metal hooks you pushed out of the way.

They make it harder for the seat to come off if the latch happens to fail for some reason and I kind of like that. ;)

Agreed, but I've got a Corbin saddle too and they come without those hooks. They have rubber stoppers on the bottom of the seat pan that contact the subframe to keep the seat off of the bodywork, so in our case, those hooks aren't needed unless a return to the stock seat is in our futures. Its not for me. At all... I like this idea, for quick trips... It should hold my camera and a lens or two, some batteries. Nice!

Hmmm?
A bag that fits snugly up against your BUM! (that's English for butt for you Americans) it will forever been known as the
"BUMBAG"

Look's good mike. Happy rainy Friday!

Hmm. I did the same thing on my CBR600 11ish years ago. Here are some pics of what developed.

First you think, just essentials, a disc lock, a sandwich. Then you stop at a store and realize, if I can carry a 200lb passenger........

Then your mad when your stuff isn't lockable when you go into the next store. Then it gets wet in the rain.

Eventually you put brake lights in it and a power socket to charge your cell while you ride. Then LED lights on the interior to see the 2 helmets you can now fit.

Holy s**t! I love it!

I prefer The LIL"Horse design rack, and my carry-all bag... (two helmets, three jackets, racing leathers, dinner jacket, extra boots, kitchen seat, etc.....)
I don't think I have ever needed a selection of tools on commutes, or weekend excursions on any honda, i have ever owned..

Now you fears of this need of tools -in prior owning a COWASKI. Is understandable

That what we call them in the UK. In the US they call them fanny pack but fanny means something else to us in the UK LOL

(:-})

In 2001 I modified the Ventura system "sport" rack (I also have the tour rack & two zip-together bags + semi-hard panniers for long trips) & have the old Warshawsky trunk shown (i.e., known to non-Chicagoans as J.C. Whitney) and the slightly larger Shad SH-40 Cargo Top Case.

Looks good and all, and I'm as frugal as the next guy, but why not just buy a $30 magnetic tank bag? Mine expands to hold a 24 pack of beer (cans of course). Not trying to popo your project at all - just my 2 cents.

The cheap dutchman in me respects the cheapness and injenuity of your "Bumbag", but it can't really be a substitute for real motorcycle luggage.

Nothing beats a lockable, waterproof topcase.
Tailbag, saddlebags, and tank bag- With this setup, I can carry nearly too much gear on my bike.

If it's more than a tankbag and the topbox, might as well take the cage.

Bingo.
+1
my setup. Minimal. I have an expandable oxford tank/tailbag, and saddlebags if need be.
Attachment 23960

I realize it's not ideal but I had the stuff on hand and with limited funds I'd rather focus on maintenance and CCT's before thinking about luggage. It's just a hold-me-over until then and figured I'd post since it might be useful to others.

Oh, and no offense taken what so ever :)

But you need to handle with tankbag when filling fuel - what is in fact quite often. I like the idea of this small pack at rear, top case looks too much travel engaged.

Anyway, I want to ask, who is the manufacturer of your belly pan? Looks great.

+1 On a tank bag

True on the tank thing. I tend to use the oxford expandable bag as a tail pack, and throw a small tankbag on for keys/ wallet etc.

The belly pan:
I wish I knew who the manufacturer is. It's carbon fiber, but it had some cracks from a previous drop from the last owner. I glassed it up, reinforced the cracks, and painted it.

It´s a shame, I cannot find it anywhere.

It looks like a Moriwaki or a copy of a Moriwaki belly pan. ;)

Unfortunately not, I have a copy of Moriwaki, this one looks similar but a bit lighter look. Maybe it is taken from different bike.

Definitly not Moriwaki.

Its made for the hawk.

I'll try and get some pics and some info on it in the next few days.

OP, sorry for the thread jack!

No problem at all and as for this...

My superhawk is not only a fun toy but my main and only form of motorized transport so I just look for ways to carry what I think I might need. Hell I've found I can bungee a small cat carrier to the back so that's one problem solved. :eek:

I wonder how bad a cat would be freaking out on the back of a hawk, lol...
I'd love to see video of that!

He doesn't do too bad on the bike. I've taken him about half a dozen times on my last bike and after the second time he was quite calm but it was only on trips less than 5 miles one way.

Mike21091, I'm a few miles south in Tarpon Springs... next time you're on US 19 with a cat out back, PLEASE let me know in advance so I can bear witness to the event... please... LOL.