1998 superhawk engine swap frame lock bolts
 

Anyone know a good website to get these wrenchs for teh bolts that are on the frame?

I saw one posting for this, but teh guy gave no link to where he purchased them.

Yes i dont have a prob manufacturing them outta old sockett, but the torque they say isnt the same when you put it back on.

The honda dealer wants 220, for one and there are two I need.

Any ideas? Anyone in Los Angeles cool enough to let me rent them for a weekend?

Cheers

Make um,,, if you can... Use the service manual TQ as a base, and not be too concerned with a final values when putting it back together.. Common sense and some general wrenching knowledge plus a home built socket will work just fine.

You'll have to explain what you mean about the torque...? My torque wrench generally doesn't care whether the sockets says Honda on them or not... Nm is still Nm...

some other options. I would check a couple other sources. I don't think I paid over 120 for both of them total, but that was awhile ago. Punch the part number from the manual into Ron Ayers just for ballpark though I think they are high. If you have a good relationship with your dealer see if you can borrow them, even for $20 for a couple hours. Finally see if there are any members living near you that have the tools to borrow.