dumbest.question.ever.
Okay, I just picked up my 2000 Hawk and took it in for inspection. I haven't really done anything with it since I bought it about a year ago. Loaded on the truck, I see the little chin fairing is held on with zip ties. This is the little stub of a fairing that tucks under the front of the motor. On the right hand side, there's a bolt but the left hand side just has a zip tie and I can't see where a bolt is missing or would go. Surely she didn't come from the factory with a friggin zip tie? Any info?
|
Negatory, there are mounting points. I think you can see the inside one on the e-bay link:
01-05 VTR 1000 VRT1000 Center "V" Lower Engine Cover | eBay But I luv me some zip ties! |
Still, a zip tie beats duct tape.
|
Ducati's come with zip-ties all over them from the factory; they can't be that bad! Strong, light, inexpensive, come in all different colors/sizes, adjustable, replaceable, weather proof... you can repair ABS plastics with them or hide wiring, they don't fall out from vibration and come heat resistant. You can even make a chair out of them:
http://www.ziptiethis.com/wp-content...iptiechair.jpg |
And you don't need metric tools to get them off. Just a metric knife!
|
Originally Posted by 7moore7
(Post 309073)
Ducati's come with zip-ties all over them from the factory; they can't be that bad! Strong, light, inexpensive, come in all different colors/sizes, adjustable, replaceable, weather proof... you can repair ABS plastics with them or hide wiring, they don't fall out from vibration and come heat resistant. You can even make a chair out of them:
http://www.ziptiethis.com/wp-content...iptiechair.jpg |
Zip ties rule! They make great universal mounting breackets and fastners!!!!!
|
2000 Honda VTR1000F SUPER HAWK Parts, 2000 Honda VTR1000F SUPER HAWK OEM Parts - BikeBandit.com
Check this out, you can order the bolt if you need it too. |
one bolt goes in from the front. that's probably the one they replaced with the zip ties.
|
Thanks one and all. I looked at the left side and didn't check the front. If there's a bolt missing, that's gotta be the spot. My faith in Honda is restored.
|
Make sure the clip/s is on the headlight surround for the little bolt to thread into through the inner panel part of the fairing. And yup a zip tie can be used as a bodge to hold it all together.
|
I dont even have one of those chin fairings
|
I'm not sure I understand what Wicky means about the headlight surround? That applies to the chin fairing?
|
Originally Posted by 7moore7
(Post 309073)
Ducati's come with zip-ties all over them from the factory
:p |
There is on on the right side and one on the front to the left. You have to get on the ground to see it, but there is a small shelf on the fairing with an open space, the bolt is inside there.
|
All times are GMT -7. The time now is 02:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands