Quick action throttle
Anybody know who doe's them for the Vtr,have looked but had no luck finding anything.Any alternatives appreciated also
|
Welcome!
that's a good one. Haven't heard of quick turn throttle for the suphwk. Did you search any stunter forums? https://www.superhawkforum.com/forum...tle-kit-22314/ HRC throttle maybe |
Thanks Nath,seems the RC45 throttle tube is an option but not an entirely great one,I have the complete housing from my old Yz426 in the shed,I may try that and see if it will work:)
|
you can always make your own with some plastic pipe...
take some pvc pipe and cut a thin section, then cut a slit in it to make it a C so you can fit it in the cable guide and presto - short throw throttle tube - and all it took was a couple dollars at the hardware store... or less if you have some lieing around... |
Originally Posted by scottiemann
(Post 342192)
you can always make your own with some plastic pipe...
take some pvc pipe and cut a thin section, then cut a slit in it to make it a C so you can fit it in the cable guide and presto - short throw throttle tube - and all it took was a couple dollars at the hardware store... or less if you have some lieing around... |
|
I use Lockhart Phillips units on all my racebikes. Cant picture wanting one on a street bike though.
|
Actually my experience is that once you install it and ride for a few hours it feels perfectly natural however I don't have a monster long gravel driveway either.
|
HRC Throttle Tube
Originally Posted by VeeTR
(Post 342183)
Anybody know who doe's them for the Vtr,have looked but had no luck finding anything.Any alternatives appreciated also
I have one available if you're still interested, I'll have to check my notes for how much I paid. Let me know. |
I found the part number on simonkobe's ebay post: 53141-mt7-000
Called my local honda shop, price is $21.77 out the door. :) Thanks! |
Originally Posted by HRCA#1
(Post 342279)
I have one available if you're still interested, I'll have to check my notes for how much I paid. Let me know.
|
Originally Posted by thedeatons
(Post 373590)
I found the part number on simonkobe's ebay post: 53141-mt7-000
Called my local honda shop, price is $21.77 out the door. :) Thanks! |
just glue a zip tie on the twist under where the throttle cables ride. cut off the head of the zip tie and bevel the edges of course. i did this on a ninja i used to have, it was called the quarter turn throttle mod.
|
I have a thread on this forum of how to use PVC pipe to make a custom ramp to turn it into a 1/4 turn throttle.
|
yamaha R6 units also fit, and bin the return cable it makes things a lot easier and lighter to use
|
Originally Posted by fabiostar
(Post 411369)
yamaha R6 units also fit, and bin the return cable it makes things a lot easier and lighter to use
|
HRC Part 53141-MT7-000 is a quick turn throttle tube that fits right in, no mods required. The only caveat is it takes up most of the available cable adjustment. It's available from Partzilla, ETC. for about $25 USD.
|
All times are GMT -7. The time now is 08:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands