LP no longer makes or carries the popular IV directional. I'm sure a lot of you know that by now but I'm bummed because it has been on my to-do list to pick up a pair of dual-fil medium ones.

I know flushmount discussions are boring, simple and have been beaten to death. Still, It seams like with a little convincing it seams like anything will work.

These should work, right?

http://cgi.ebay.com/ebaymotors/FLUSH...Q5fAccessories

 

Those are two wire, not 3 so you'd lose your "running lights" Other than that, if you can make them fit, they should work.

 

true dat and be careful wiring them up so you don't fry them with the always hot wire...RC

don't ask how I know this

 

Yep mine wire the same way. Only two wires. I don't run the running lights. I just used the factory plug off the originals so it was plug and play. Makes taking the plastic off easier

 

protons!

 

I believe those are too small for the VTR's turn signal cut out.
these are the flush mount's I used...
http://cgi.ebay.com/ebaymotors/ws/eB...44842&viewitem=

The Protons are very nice... but are also very pricey.

 

If you want the LP's call around I'm sure you can still find some out there, I know we still have some in stock.

 

superhawk 22: who is we? I'll cut a check and send it if you work at a supplier that ships.

I want dual filament amber medium type IV

 

Had these on my ninja. I think they are 2-wire and the fitment looks like it could be an issue.


http://cgi.ebay.com/ebaymotors/_Moto...4506.m20.l1116

 

Go Protons. You won't regret it!!

 

Sorry left that out didn't I, CycleGear, stores don't ship but cg.com will.