Mr Stupid Can't Open the Seat...
Okay, SO.... There's a cover on the passenger pillion, there's apparently some kind of space under the seat, and there's a lock on the back of the tail... My powers of deduction tell me that those three things may be related!
But how? I have turned the lock and pried on the seat and the cover, but nothing happens... This kind of reminds me of the hidden gas cap on a VMax. How do I open this thing??? |
Lots of wiggling of the seat help, although the key might not be pulling the cable far enough to release the latch holding the seat. All that takes is a piece of hangar inserted, snatched around said cable and tugged, you should be able to lift the seat high enough to peer in and see it - it's toward the back.
|
the best thread on the forum...
https://www.superhawkforum.com/forum...ht=remove+seat:noevil:but you need to read the whole thread to really figure it out
|
While the key is turned, I grab the seat on the left front at the gas tank and pull straight back towards the key. It's kind of like Ctrl+Alt+Delete.
|
Originally Posted by LineArrayNut
(Post 166168)
https://www.superhawkforum.com/forum...ht=remove+seat:noevil:but you need to read the whole thread to really figure it out
|
Could you narrow the info down to say the best 100 pages? I think I may have A.D.D.
|
Turn key.
With left hand lift and hold rear of cowl/seat. Simultaneously place palm of right hand flat on rider's seat, press down and push toward back of bike in a continuous motion. Or buy a Sargent. |
Make that a continuous QUICK motion
|
Once you get the seat off, take a hammer and bang the two mounting brackets that are part of the frame forward just a tick and you will never have a problem again.
|
All times are GMT -7. The time now is 06:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands