SuperHawk Forum

SuperHawk Forum (https://www.superhawkforum.com/forums/)
-   General Discussion (https://www.superhawkforum.com/forums/general-discussion-30/)
-   -   Headlight bulb retainer clip (https://www.superhawkforum.com/forums/general-discussion-30/headlight-bulb-retainer-clip-8190/)

deluzunal 02-26-2006 11:48 AM

Headlight bulb retainer clip
 
I was doing a simple lighbulb replacement job on my 99 Shawk until I unscrewed the retainer clip that puts tension onto the headlight bulb to hold the bulb in place. Once I unscrewed it, the retainer sprang off. So naturally, when I went to look for it I stepped on it. I didn't step on it too hard so I don't think it's too far out of shape. The retainer clip is a pretty wierd shape, if you could call it that, it's more of a zigzag piece of coat hanger-like material. I've searched the web for shop manuals and micro fische (http://www.burniemorgan.com/firestorm/vtr_fiche.zip)
and none of them had a picture of the retainer clip! :x I was wondering if anybody could tell me how it goes back on or if anybody could send a picture of their fully assembled headlight from the driver's side with the dust cover off so I could get an idea of how to put this thing back on.

bty - http://www.bikebandit.com/ has a good database of microfische for a buttload of different bikes

marmaladedad 02-26-2006 04:35 PM

Hmm...sorry, I'm not so good at the explaining thing over the interweb. Where are you located? I might be able to meet up with you and show you.

Essentially, the straight, long piece goes underneath the screw. There should be two bends on the retainer which would hold the bulb in against the headlight opening. The last "side" would be a small tab that can be bent a little bit to swivel underneath a tab.

Loco 02-26-2006 10:31 PM

I'm shipping a headlight assembly to a guy tomorrow. I'll take a shot of it before i send it off. Also, if I can get a good shot of the VTR manual, I'll post that also.

superhawk22 02-27-2006 06:47 AM

You can also download the manual here, I think the post says free workshop manual or something. Here it is.

https://www.superhawkforum.com/viewtopic.php?t=1661

deluzunal 03-01-2006 12:26 PM

Re: Headlight bulb retainer clip
 
marmaladeboy,

You're right, it is hard to describe how to put the thing on.

I'm in Ontario, Cali if you want to meet up somewhere to show me how this thing goes on. Where are you located?

marmaladedad 03-01-2006 02:43 PM

I'm in the San Gabriel Valley - about 30-35 minutes west of you. PM me if you want to meet up.

deluzunal 03-02-2006 10:33 AM


Originally Posted by marmaladeboy
I'm in the San Gabriel Valley - about 30-35 minutes west of you. PM me if you want to meet up.

Every time I try to PM i get this message:
"Sorry, but the administrator has prevented you from sending private messages."
Am I missing something?

marmaladedad 03-02-2006 12:32 PM

Errr, I dunno. Email me at hhh919@gmail.com


All times are GMT -7. The time now is 08:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands