Custom Exhaust Piping
 

Hey guys, ive been really wanting to get some high mounts on my bike, and i already have micron low mounts and i was curious if you know any sites that have JUST the piping for superhawks, or anything like that?

I would guess any half way decent exhaust shop could make some for you.

you can call the exhaust co. if they sell a high mount you can buy a new set of mid pipes and new hangers.

mids pipes are usually around $100 ea.


tim

High Pipes
 

Call Two Bros - I got (just) the high pipes a while back.
http://www.twobros.com/index.htm

Two Brothers stopped making high mounts for Superhawks I think. Unfortunately more companies are probably following suit and not producing any exhaust for our beloved but dated machines.

After helping lazn mount up some high mounts yesterday I was curious about the same thing. I called a few muffler shops and once I found someone who could do 1 3/4 inch pipe they quoted about 35 for a set of custom mids. They needed to look at it for more of an official quote. Lengh is 22" and 24" for each pipe we measured off of my friends. I think ill be doing this mod soon so ill keep you posted on what I do. I am thinking of cutting my D&D's down to about 3/4 of the length and mounting them at an angel under the rear end so from a top view they will follow the lines of the tail. Also this should keep them back from the passenger peg. When my wife sat on lazn's bike her boot were up against the exhaust. His are carbon fiber and will not get as hot but I can see that being a problem. I am gonna try photoshoping what I have in mind.

YRUYUR- fyi jardine mids fit perfect with d&d cans-the chrome mids that go with the black round powdercoat mufflers...

Alright guys thanks for all the great feedback, ill def look into a couple muffle shops and call Two Bro's. and YRUYUR def. keep me posted on what happens with ya because im def. interested and your already a couple steps ahead of me so let me know how it goes. Thanks a lot guys, i appreciate it!!

Pawel