97-00 Parts book
 

anyone have a parts book for 97-00 SH

What kind of parts?

i need the spacers that go with the original jets for a SH carbs... mine has a dyno Jet and who ever installed it did not put them in when they re jetted the carbs(dumb asses) plus i need some other random parts...

Xtreme Powersports' 2000 Honda Street Bike VTR1000F SUPER HAWK Parts List

you can order from them too. Most local honda shops have this kind of service. these guys are a bicycle ride from my house here in tampa so I never have to pay shipping.

ok thats awesome but 24 is more than i want to spend..... wish i could find out the thickness of the spacer so i could just get a washer...

Spacers for the jets Attachment 12036

not sure what you mean by that.

the ones that go between the c-clip and the slider housing. the instructions say to use the original spacer on old needle jet for the new dyno jet one but the dubm a$$ didnt put it on.

So you want spacers for the needles not the jets.......ok then that is easy, just go pick up a bag of #4 washers at any hardware store..... ;)

ok, now you say spacer for needle or jets? you space the jets too?

You might want to lay of the happy juice as you are the one asking about spacing the jets.....

or don't you remember post #3 in this thread???

:rotf::rotf::rotf:

short term memory is shot sorry. i ment to post jet needle not the jet it self..... anyways #4 washers it is. thanks

FYI,
Needle jet spacers are about 20 thousandths thick. It is the equivilent of 1/2 of a e clip setting. Make sure you dont put too thick a washer in there. Also mic them to be sure they are all the same thickness, or you will throw off the jetting.