WTB: Stock Turnsignal Wires w/ Plugs
 

I just got my Hawk and the front aftermarket turnsignals were wired really half-assed. If you've got a set of stock front signals with the '02+ type plugs on the end, I'll take 'em off your hands.

I don't care if the stalks are broken or anything like that, as long as the wires are intact and have the plugs on the ends. I know someone has to have a rashed pair laying around someplace.

PM me or email jeremyjo(AT)gmail.com

Thanks,

Jeremy

You can also use the front turn signals from a variety of other Honda bikes. I had a spare set from my F3 that bolted up right to the Superhawk's openings. HTH.

I'm good on the turnsignal part, they work then the wires aren't wiggling around. I would like to have the plugs/wires from a set of stockers. The aftermarket ones are too short to just wire together and at the moment they are just sortof stuff into the stock bike-side connectors. I figure that if i had the stock wires and connectors from the stock turnsignals, I could splice them into the turnsignal wires that are there, making them longer, and then plug the plug in so that the connection stays tight.

Unless you're saying that those bikes have the same connectors on them?

Thanks for the insight, tho.

-Jeremy

Yes, they should all have the same wiring harness.

Could you also splice an amount of wire onto the short wire, and then it would be long enough?

Yeah, some bullet connectors and wire extensions are Plan B if no one has anything to offer up.

-Jeremy