WTB: manual CCTs
As the header says...
Recommendations, offers to sell? Need good quality set of manual cam chain tensioners and any associated parts for converting my (red, if it matters) 98 SHawk to manual CCTs. Sorta need them ASAP (no overnight needed) to zip code 66523 in USA, as the shop will be doing valvetrain service by the middle of next week. TIA for any help/offers to sell. P.S. I can do PayPal, but don't like to. I'd consider overnighting a check or MO & having shipped after it clears your bank. |
Best contact Mark Krieger > Krieger Cam Chain Tensioners
|
I tried Krieger, by way of his website, and the email bounced.
|
I've tested it and it seems okay, and sent Mark an email linking to this thread (without a bounce back occurring).
http://cl.ly/0Q22292n2w2T/Image%2020...25.12%20pm.png |
Krieger here, I am not home at the present, otherwise this would be no problem. I am in Akron dealing with a medical emergency with my daughter due to a simple, but devastating fall, hitting her head on a tile floor from what may have been a seizure.
I will be home Saturday and Sunday, when other family can take my place, to do some work on orders, enabling me to ship stuff out Monday morning. If that works, great. My phone number is on the site and I will answer calls depending on timing, but can return calls too. Make sure you are using the right email. It is kriegercct@clems-garage.com make sure you use the dash, not a dot and the common name mistake is inverting the i and e. I wish I could say I could do the kit and ship today, but I also wish I wasn't here for the reason I am at the hospital much more so. Things are progressing, but it is very slow and very small steps. The hope is that those small steps continue. |
Family first. Hope shes gonna be okay. (My post from earlier this AM seems to have disappeared. )
I'll try to get an order in to you today. Do you supply full kits to do the swap? I think I need blockoff plates, or something. |
Originally Posted by theosagekid
(Post 401942)
Family first. Hope shes gonna be okay. (My post from earlier this AM seems to have disappeared. )
I'll try to get an order in to you today. Do you supply full kits to do the swap? I think I need blockoff plates, or something. If buying used, get new gaskets (if the MCCT type your buying uses gaskets, some use an installed O ring) |
Originally Posted by E.Marquez
(Post 401947)
The MCCT is a direct swap for the ACCT, no other parts needed.
If buying used, get new gaskets (if the MCCT type your buying uses gaskets, some use an installed O ring) The Krieger fit well, looked grate and seem to not weep oil. |
All times are GMT -7. The time now is 05:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands