WTB 48 pilot jets
 

I need to bump up. The 50's that came with the factory kit are to fat and the stock 45's are to lean. Need a pair of course.

I'll swap 48's for the 50's if someone needs them.

Thanks in advance.

I betcha the 45's will work just fine. They do for most. But a suggestion if you really want them is to just take a trip to your local dealer. They'll probably charge $4 each.

Have you tried richening out the pilot screws first?

yes I have the pilot screws our 2.5
 

I set them at 2 turns and had alot of decelleration popping then set to 2.5 and it improved but not 100%. Pair blockoff are ready done and no vacumn leaks. I'll go to the shop and you can close this thread.
Thanks