need new exhaust cans
 

i have full exhaust with m4 cans but the right side has rash so id like to find some cheap ones on herm prefer alminum but carbon works to, thank again guys!!!

M4 SILENCER M4 MUFFLER M4 CANNISTER EXHAUST SPORTBIKE | eBay

not mine but how does this one look? Are the measurements right?

Post a pic or two of yours. How bad is it? Is it also dented or can it be polished out? If the rash is bad on the front of the can you can also simply shorten the can an inch or two (and the other side as well so they match). I think everyone would like to see your full M4 exhaust anyway. If you really want to be cheap just flip the muffler and flip the outlet over, rivet on a new emblem(or your old one if it's still good) on the other side, and voila new muffler ;) BTW I believe I asked M4 regarding a full SV650 I had about a year ago and they only sell the newer style machined emblems now, not the older red and while ones.

wow darn close sizes are just a bit of i think and that ones riveted together but if you look at my pictured isentially thats wat mine looks like, do you know who makws m4?

and you do make a great point maybe i could look into doing that thank you:) its got slight dings some good scraped in a central spot at the bottom of the can, ive tried to polish it:( looksbetter but not perfect, ill try and pst some pics of it tomorrow:cool:

if you look at my pictures the right side rear close ups of the bike you can see the cans and the damage:(

Ummm, M4?

M4 Exhaust · High Performance Motorcycle Exhaust Systems

Yeah do it ghetto style just drill the rivets out of the outlet, flip the can over, and remount the outlet. I mean YOU'LL know it's there if you're anal like me but no one else will see it-at least until you can find a nice replacement. Like I said only problem would be finding a "new" emblem if yours is damaged, they told me they don't sell those anymore.

hmm ok someone said they were made by yoshi i had my doubts tho, ya im definitly pretty anal like that but i could let that slide till ifound one, only thing is my insnt riveted together not sure how the ends are held in but there almost seamless lol kinda makes it hard to flip i think since the outlet had a 46 degree angle on it

Am I seeing things I'm looking at rivets in the picture in your album? At least for the outlet anyway, I can't see the front of the muffler for the inlet very well.

your right i forgot about those there is like 4 riviets, ok so i could actually be able to do this, what should i do to the 2 rivets the hold the emblem on andfter i take the emblem off? thanks again good eye!

Unless you can tig them and grind and polish them smooth, I guess you could just put two new rivets in them without the emblem. Again the point is while it's not perfect it's all facing in where it's really not noticeable and then you can always swap the can down the road. If you want new emblems check out the new style it's all they have. They're actually very nicely made so you could just order a pair of those if you want new ones.