FS: Two Brothers complete HIGH MOUNT exhaust with ceramic coating
 

~~~ SOLD ~~~ SOLD ~~~ SOLD ~~~

Complete Two Brothers Racing HIGH MOUNT Stainless steel Ceramic Coated (same as JetHot coating) exhaust system
TBR Aluminum Cans with mounting bands - Very good condition.
TBR high mount connector pipes Ceramic Coated (same as JetHot coating)
TBR high mount aluminum connector brackets - Ceramic Coated (same as JetHot coating)
TBR heel protectors - Ceramic Coated
TBR racing header pipes - Ceramic Coated. They don't make these anymore

New $975 with Ceramic Coating costs

Sell $700 + $35 shipping
__________________________________

ALSO....

TBR LOW MOUNT connector pipes. Scratches on left pipe $100 + $20 shipping
__________________________________________________ ____

Bill
lwk2@swbell.net

Pictures of the Ceramic Coated (Jet Hot type) full TBR exhaust system
[imghttp://www.geocities.com/lwk2@swbell.net/Pictures/TBR0.jpg[/img]

http://www.geocities.com/lwk2@swbell...tures/TBR1.jpg

http://www.geocities.com/lwk2@swbell...tures/TBR2.jpg

http://www.geocities.com/lwk2@swbell...tures/TBR3.jpg

http://www.geocities.com/lwk2@swbell...tures/TBR4.jpg

http://www.geocities.com/lwk2@swbell...tures/TBR5.jpg

http://www.geocities.com/lwk2@swbell...tures/TBR6.jpg

http://www.geocities.com/lwk2@swbell...tures/TBR7.jpg

[imghttp://www.geocities.com/lwk2@swbell.net/Pictures/TBR8.jpg[/img]

http://www.geocities.com/lwk2@swbell...tures/TBR9.jpg

http://www.geocities.com/lwk2@swbell...ures/TBR10.jpg

I still can't believe this.:cry: If I didn't already have most of this stuff my wife would be divorcing me from the debt you would be causing. Good luck in your racing endeavors.

Thanks !
Yep I've got the "track fever" bad.
Heck my wife may divorce me over it :D
BUT IT'S SO MUCH FUN !!!!

Did I have a hand in creating this monster? If so give my apologies to the wife and kids. :lol: Looks like stuff is selling fast for ya, PM me about the stuff I asked about and I'll see what I can do. I'm trying to get some stuff together to race in 4 classes of CCS, I'd do more but I'm illeagal in the other classes because of my mods. Oh well I could always race and get DQ'd if I podium. :lol:

Oh sorry for the Thread Jack.....bump for a great deal. :wink:

Some stuff is selling but I need the big ticket items to go...

Like this ~ROCKING~ TBR FULL RACING EXHAUST SYSTEM :D:D:D

AND the OHLINS REAR SHOCK setup by Marcus McBaine of Racing Performance Services - Houston :D:D:D

(shamless plug)

Someone here really NEEDS this exhaust system!

Don't make me part it out on eBay....that would be a shame!

Need no, want yes, love to but I have to figure out a way to sneak yet another mod past the ole ball n chain.....LOL :)

Great deal for someone, I can tell you first hand, that these items looked great on his bike, and they will look great on yours as well....

I may be interested. Are they C2 cans? Can it still be mounted to the Passenger pegs? Do you have more pictures of it? (I am blocked from Geocities) Also will need to know what jets and settings your at with the carbs. I am currentlly overseas supporting Operation Enduring Freedom and an Exhaust system is my reward.

You could always make spacers out of square aluminum to keep the passenger pegs. I think it cost me under $15 for the aluminum and longer bolts.

I have seen that done, it looks real good too.....

Man I can't beleive these were not snatched up in the first two mins....talk about a smokin set up....

think man think, how could I possibly slip this in under the radar of the ole lady....hmmm....still thinking....lol

They are the small oval cans. Can't remember if that's the C2 version.
What's your email & I'll send you the pics.
You would have to get longer bolts & mount the passenger peg brackets on top of the TBR Hi-mount brackets.
Maybe add a spacer between the two.
I just took off my pass pegs for a cleaner look (plus my wife hates motorcycles & would never ride with me)
Below 3000 feet Dynojet says to use 180 front and 185 rear with the needles on the 4th clip. I ran mine on the 5th clip & changed the idle jet from stock 45 to 48.
I removed the dynojet kit & have it for sale too (a lot less than a new kit)
I left the 48 idle jets in the bike so they don't come with it but you can buy them for $7 each at a good motorcycle shop.

Thank you for serving !!!
What unit are you in?

If you buy this system I'll throw in the jet kit for free for you.
And if the shipping is less than $35 I'll refund you the difference.

It comes with all the instructions & trouble shooting info too.
If you have a little mechanics type background it's pretty easy to install.... just takes some time
I can answer any questions you have on the install

sorry to hear your sellig the hawk,but at least your making your next bike another good one.I've rode an 03 600rr they have crisp throttle response but to revvy for me.Any ways good luck to ya and stay safe.loco are you next?

I may be back after my race track adventures.

I've always been partial to V twins :D:D:D

Air Force Security Forces

pm sent with email.

:cool:

sorry bro :(

Those header pipes are almost impossible to find.
This was the last set TBR had.
In fact they were in their display case.
Akropovic might still have some but they are even more expensive than TBR

These may be back on the market.
More on this later.....

It's still for sale

(other deal didn't work out)

Yes I have to pass. Two months too early for me ><

No problem.
Thanks for the interest in them.
Hope you get to come home soon!

Bill

I would like a chance at the hi mount mid pipes and brackets if you have to part it out. I have C2 low mounts on my bike and never carry pass. as I also keep the seat cowl on.

they are for sale in next ad down :D