FS: Two Bros Racing exhaust - in parts
 

~~~SOLD ON EBAY ~~~ SOLD ON EBAY ~~~ SOLD ON EBAY ~~~
TBR Low Mounts connector pipes with polished Aluminum cans.
Cans are beautifully polished
Some small scratches on left connectorpipe
Retail $649.98

Sell for $325 plus shipping
________________________
TBR HIGH MOUNT connector pipes with TBR heel protectors all Jet Hot type ceramic coating. High mount Can mounting brackets included (also Jet Hot coated to match pipes)
Retail:
High mount pipes $300
Heel protectors $60
Jet Hot type ceramic coating $25
Total retail cost $385

Sell for $200 plus shipping sale pending to senecagreen
_________________________
~~~ SOLD ~~~ SOLD ~~~ SOLD ~~~
TBR race header pipes Jet Hot type ceramic coating.
Replace your ugly blued HEAVY stock Honda exhaust headers with these beauties ! :D

Retail
Pipes $600
Ceramic coating $150
Total retail $750

Sell for $365 plus shipping

going on ebay
___________________________

Pictures:


http://www.geocities.com/lwk2@swbell...tures/TBR0.jpg

http://www.geocities.com/lwk2@swbell...tures/TBR2.jpg


http://www.geocities.com/lwk2@swbell...tures/TBR5.jpg

http://www.geocities.com/lwk2@swbell...tures/TBR6.jpg

http://www.geocities.com/lwk2@swbell...tures/TBR7.jpg

[imghttp://www.geocities.com/lwk2@swbell.net/Pictures/TBR8.jpg[/img]

Would you take $550 including shipping for the headpipes and high-mount gear?

Hi, am I correct in assuming that since the midpipes fit stock headers that any brand of slip ons will fit the two bros header? Also when you say Jet Hot "type" coating what kind of coating is actually on the header? Finally what's the best way to get in touch with you? Interested in the header and just wanted to ask a couple questions. I can be reached at email or on my cell Thanks.

Hey Captain that's a broward number isn't it, where do you live? I live in Palm Beach county and ride with a buddy from Deerfield, we should hook up for a ride sometime. Anyway most slip-ons are the same size pipes and I used Jardine mids with 2bros cans before so it should work.

Yes sir, I actually am living in Boynton right now. Sounds like a plan. Give me a call I need to get the dust off mine (I'm embarrased I used to ride every day) as it sits way too darn much. At least I sold my ZX12 but kept my Superhawk so that should earn me a few points on here...

I'll take the hi mount mid pipes with the heel protectors and brackets. I'll send you a pm.

I sent you a pm not sure it went thru. I'll take the hi mount mid pipes with brackets and heel protectors. Post back or pm me please.

Cool we meet in Boyton to ride together, I'll keep you in mind next ride.

mistermohawk asked 1st so we're working on a deal.
if it falls thru I'll let you know here.

The Jet Hot "Type" coating was done locally.
He used the same ceramic coating material Jet Hot does BUT he polished all the parts after coating them.
Jet Hot does NOT polish.
Their finish has a slight "wrinkled' look like tiny orange peel bumps.
Mine has that orange peel polished out.
That's why I went with the local guy. It was $25 more expensive than Jet Hot to get it polished with all the pipes, heel protectors, & brackets done

did not get a PM from you, senecagreen

only from superchicken996 & mistermohawk

There better be deals like this when I'm not poor from being in school and not able to hardly work!!!

Got your PM
Send me your paypal email address & I'll send you an invoice.

senecagreen has dibs on the High Mount Pipes UFN

Thanks, Bill

sent you a pm