FS: 2000 Used Engine, Running... Rebuilder
Thread Starter
jet wrench
Back Marker
Joined: Jun 2007
Posts: 175
From: cowtown, CA
FS: 2000 Used Engine, Running... Rebuilder
For Sale... Complete running eng from 2000 Superhawk 28k miles.
Runs strong, starting to smoke... looks like valve guide seals on rear cyl to me??
2nd gear is BAD, jumps out consistantly @ 5-6k rpm
Lt side case is caved in, stator has rubbed, and may be bad. Damage was not done on this motor, these parts are off my replacement.
Rt side case is rashed but useable.
No starter, no carbs
Asking $200 plus shipping, prefer local pickup.
MAY be willing to part out, depends on response...
Pics upon request, it looks like an engine...
Located in Northern Ca, S. Sacramento
Runs strong, starting to smoke... looks like valve guide seals on rear cyl to me??
2nd gear is BAD, jumps out consistantly @ 5-6k rpm
Lt side case is caved in, stator has rubbed, and may be bad. Damage was not done on this motor, these parts are off my replacement.
Rt side case is rashed but useable.
No starter, no carbs
Asking $200 plus shipping, prefer local pickup.
MAY be willing to part out, depends on response...
Pics upon request, it looks like an engine...
Located in Northern Ca, S. Sacramento
Last edited by loserbaby; Dec 24, 2009 at 11:12 PM. Reason: price
Thread Starter
jet wrench
Back Marker
Joined: Jun 2007
Posts: 175
From: cowtown, CA
Here's items I'd be interested in trade/partial trade for... in the order of need...
Fr Brake lever
Hugger
undertail (not stock)
full lwr fairing
I'm flexible...
Fr Brake lever
Hugger
undertail (not stock)
full lwr fairing
I'm flexible...
Last edited by loserbaby; Feb 20, 2010 at 11:51 AM.
Thread Starter
jet wrench
Back Marker
Joined: Jun 2007
Posts: 175
From: cowtown, CA
Thread Starter
jet wrench
Back Marker
Joined: Jun 2007
Posts: 175
From: cowtown, CA
For Sale... Complete running eng from 2000 Superhawk 28k miles.
Runs strong, starting to smoke... looks like valve guide seals on rear cyl to me??
2nd gear is BAD, jumps out consistantly @ 5-6k rpm
Lt side case is caved in, stator has rubbed, and may be bad. Damage was not done on this motor, these parts are off my replacement.
Rt side case is rashed but useable.
No starter, no carbs
Asking $300 plus shipping, prefer local pickup.
MAY be willing to part out, depends on response...
Pics upon request, it looks like an engine...
Located in Northern Ca, S. Sacramento
Runs strong, starting to smoke... looks like valve guide seals on rear cyl to me??
2nd gear is BAD, jumps out consistantly @ 5-6k rpm
Lt side case is caved in, stator has rubbed, and may be bad. Damage was not done on this motor, these parts are off my replacement.
Rt side case is rashed but useable.
No starter, no carbs
Asking $300 plus shipping, prefer local pickup.
MAY be willing to part out, depends on response...
Pics upon request, it looks like an engine...
Located in Northern Ca, S. Sacramento
I'm afraid it goes to eBay/Craigslist from here.
Here's pics just for fun...
Thread Starter
jet wrench
Back Marker
Joined: Jun 2007
Posts: 175
From: cowtown, CA
Thread Starter
jet wrench
Back Marker
Joined: Jun 2007
Posts: 175
From: cowtown, CA
Here's a link from a post here. Maybe you can look into it and see what your willing to spend, I think I looked into it once and $150 or so was close. I would be shipping from Sacramento or maybe Stockton, ca area. My zip is 95632.
https://www.superhawkforum.com/forum...ht=engine+ship
Thread Starter
jet wrench
Back Marker
Joined: Jun 2007
Posts: 175
From: cowtown, CA
Still available...
For Sale... Complete running eng from 2000 Superhawk 28k miles.
Runs strong, starting to smoke... looks like valve guide seals on rear cyl to me??
2nd gear is BAD, jumps out consistantly @ 5-6k rpm
Lt side case is caved in, stator has rubbed, and may be bad. Damage was not done on this motor, these parts are off my replacement.
Rt side case is rashed but useable.
No starter, no carbs
Asking $200 plus shipping, prefer local pickup.
MAY be willing to part out, depends on response...
Pics upon request, it looks like an engine...
Located in Northern Ca, S. Sacramento
Runs strong, starting to smoke... looks like valve guide seals on rear cyl to me??
2nd gear is BAD, jumps out consistantly @ 5-6k rpm
Lt side case is caved in, stator has rubbed, and may be bad. Damage was not done on this motor, these parts are off my replacement.
Rt side case is rashed but useable.
No starter, no carbs
Asking $200 plus shipping, prefer local pickup.
MAY be willing to part out, depends on response...
Pics upon request, it looks like an engine...
Located in Northern Ca, S. Sacramento
Thread Starter
jet wrench
Back Marker
Joined: Jun 2007
Posts: 175
From: cowtown, CA
PM if you want to discuss further.
Thread Starter
jet wrench
Back Marker
Joined: Jun 2007
Posts: 175
From: cowtown, CA
For Sale... Complete running eng from 2000 Superhawk 28k miles.
Runs strong, starting to smoke... looks like valve guide seals on rear cyl to me??
2nd gear is BAD, jumps out consistantly @ 5-6k rpm
Lt side case is caved in, stator has rubbed, and may be bad. Damage was not done on this motor, these parts are off my replacement.
Rt side case is rashed but useable.
No starter, no carbs
Asking $200 plus shipping, prefer local pickup.
MAY be willing to part out, depends on response...
Pics upon request, it looks like an engine...
Located in Northern Ca, S. Sacramento
Runs strong, starting to smoke... looks like valve guide seals on rear cyl to me??
2nd gear is BAD, jumps out consistantly @ 5-6k rpm
Lt side case is caved in, stator has rubbed, and may be bad. Damage was not done on this motor, these parts are off my replacement.
Rt side case is rashed but useable.
No starter, no carbs
Asking $200 plus shipping, prefer local pickup.
MAY be willing to part out, depends on response...
Pics upon request, it looks like an engine...
Located in Northern Ca, S. Sacramento
