98' Post crash part out
Hi All,
Man just when I got the clutch finally dialed in perfect I went a little hot and wide into a lefty.. So the front wheel, front shocks, front cylinder exhaust pipe (fwd), windshield and all the fairings are gonners. Everything else is up for grabs. I'm gonna borrow parts of the list in Mike's thread (thanks Mike). Anything listed w/o a price feel free to make me an offer. Anything not listed, just ask :) Micron Exhaust w/ rear peg and high mount attachments - $200 SOLD - Sargent Seat w/ flip out hooks (black w/ red pinstripe) - $150 VFR risers - $10 /ea DAMAGED - Steel brake lines Rear Peg assembly - $20 /ea Right Radiator w/ fan - $50 Gauge Cluster (37k miles) - $65 Regulator/Rectifier - $10 Ignition Chain Cover - $10 Headlight - $30 Rear wheel - $40 Calipers (One front is damaged) - $20 each Front disc brake (One front is damaged) - $20 /ea Gas Cap - $15 Rear Shock - $35 Exhaust Header FlyWheel Ignition coils Carbs Stator and cover Entire motor Any Sensor - $5 Engine crank case cover (left) - $15 SOLD - Engine cover (right) Oil Pan - $15 SOLD - Clutch plates and springs (new) - $20 180 rear Bridgestone Battleaxe T31 (~20% used) - $25 120 front Bridgestone Battleaxe T45 (~10% used) - $25 Also, right and left aftermarket Red/Black upper fairings. They are basically new but the red is just a little off from the Honda Red so I went back to my dinged up ones. Shiney though. - $30 /ea. $50 for the set. $5 for the crazy box I'll have to find to fit them. All prices + shipping from San Jose, CA. Your choice of fast or cheap. Local pickup no problem. I can provide pics of any items. Thanks for looking. Four oh 8, 3 3 Seven, 8k Nine or Four oh 8, Tree Tree 22 One Nine Two Call or text. Cheers, Paul |
Pics of micron exhaust, seat?
Can text to 409.273.24OI Thanks! |
I guess they're kinda large. LMK if you want others. Thanks!
https://cimg2.ibsrv.net/gimg/www.sup...1d51ddf5e8.jpg https://cimg3.ibsrv.net/gimg/www.sup...c071c31a20.jpg https://cimg4.ibsrv.net/gimg/www.sup...7fe7d9d95f.jpg https://cimg5.ibsrv.net/gimg/www.sup...dba7ff92ba.jpg https://cimg6.ibsrv.net/gimg/www.sup...3f23931cfe.jpg https://cimg7.ibsrv.net/gimg/www.sup...5a62f4250d.jpg |
The fwd pipe is bent up against the engine. I'm not sure I can get it off with a broken collarbone :/
|
I PM'd you. I want the seat.
|
Where are you located?
|
Is it possible to get a pic. of the underside of the seat?
|
Cary, shipping to Costa Mesa is $11.50 ground or $41 two day. I will take me at least a day to get a box that'll fit i and get it ready to go.
https://cimg4.ibsrv.net/gimg/www.sup...a19510b80c.jpg https://cimg5.ibsrv.net/gimg/www.sup...21a824aaa7.jpg https://cimg6.ibsrv.net/gimg/www.sup...a81ebd1796.jpg |
Sounds fair, I have to wait until Tuesday anyways as I'm leaving at 'O dark thirty on a 4 day ride up the CA coast and won't be here to sign for it.
|
I know someone pmd you for the seat. Can I be next in line. I have the cash and can PayPal you whenever
|
Also I'll take the stainless brake lines
|
Can you post a pic of the fairings
|
Regarding the seat, if Cary doesn't close it out tomorrow there's one other person that msg'd me earlier this evening but you're right behind him :)
Brake lines, I'll pull them off tomorrow. Fairing pics below. Note that the front tab under the headlight is missing (see pic) so you may have to figure something out there. Perfect and shiney besides that. Cheers. https://cimg5.ibsrv.net/gimg/www.sup...7e26b8a636.jpg https://cimg6.ibsrv.net/gimg/www.sup...5994f0d529.jpg https://cimg7.ibsrv.net/gimg/www.sup...1cb0758151.jpg https://cimg8.ibsrv.net/gimg/www.sup...fef32fdc2e.jpg |
Would you happen to have the speed sensor available? |
I'm not exactly sure where that is but I'll have a look in the shop manual. Need your sip to calculate shipping. Cheers.
|
Guess I have some bad luck. I'll wait at my spot #3 for the seat. I just went down about 10 min ago making a right and washed out in some gravel. I need the clutch cover.. And while you are in there might as well buy them new springs and plates you got . Please send PayPal info asap with a price for regular and rushed shopping. I'll decide depending on the price difference. Zip 33032 it's my every day driver so I need it asap please. Also hope you heal up well
|
Looks like those will both fit in a flat rate express box. $18.90. $40 for all the plates & springs and $25 for the cover.
How about $80 shipped? Sorry to hear about your accident. pschnied at gmail point com is my paypal address. Cheers |
Sounds good to me. I'm a little out of it right now. Just to be sure this is the right side engine cover correct? I'll send PayPal first thing tomorrow am
|
Rear brake pedal side engine cover with the clutch basket under it yea? Bolts included.
Cheers |
Ok funds are a little low. And I need to get this back on the road. Send me price for just cover with priority. I'll send PayPal right now
|
Paul, I PM'd you about the seat. I was on PCH on the way to the Bay area and had no signal. If you still have it, I want it
|
Got your PayPal Mvanriel, the engine cover goes out express mail first thing in the morning.
Cheers |
Clutch basket side engine cover and seat are in route and should be showing tracking shortly.
Bad news on the brake lines. One of them is not separated where it should be. Sorry about that. I'll update the list. |
Just took the prices of everything over 10 bucks down between 1/3 and 1/2. Want something big? Make me an offer, please.
It's depressing me sitting in the driveway all broken and taken apart. |
I'll take the springs and clutch plates let me know about shipping. I'm still waiting on a gasket for the clutch cover. So I might as well. Looks very good by the way guys
|
Also the vfr risers. Do they work with Stock lines and no upgrades or are there mods required
|
Thanks Mvanriel, The VFR Risers do have a clearance issue with the front wheel all the way right. The clutch fluid reservoir would hit bottom left of the windshield fairing. My solution that I didn't get a chance to implement was to use the VFR clutch reservoir also because it's lower off the bar.
I'll get shipping info for you this afternoon after I get em' off. Thanks again! Paul |
Clutch would probably be best in a flat rate box. $13.65 I can price the slower option if you like also.
Risers will fit in there also if you decide you want them. Thanks! Paul |
What year VTR???
Need the gauges if they are in VG shape. Photos? |
By any chance do you have the foot brake pedal
|
All times are GMT -7. The time now is 03:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands