2001 red superhawk part out
01-23-2017, 02:16 PM
#1
Senior Member
SuperSport
Thread Starter
Join Date: Oct 2012
Location: Orlando, FL
Posts: 501
2001 red superhawk part out
considering parting out my 2001 superhawk. if I can get enough interest in parts ($1500 worth spoken for) I will begin parting out the bike. So far this is the list I've come up with, it is a complete and running bike and I have almost all the parts minus mirrors and such.
DMr F4 converted shock 220lbs rider $350 (pending sale)
DMr forks race revalve and springs 220lbs rider (needs seals) $300 (pending sale)
954 front end minus brake master and calipers $450
Engine runs great always maintained $500
Triple clamps $75
Fuel tank $150
Brembo clutch master from ducati $100
Factory front brake master $50
Rear brake master $50
Factory front calipers $50
Factory front rotors $50
Rear brake caliper $30
Rear rotor $30
Braided front brake lines $30
Braided clutch line $30
Front wheel Black $50
Rear wheel Black $50
Swing arm $100
Frame with clean title $500
Carbs just cleaned (factory) $100
Carbs needs cleaning (dyno jet) $100
GPR high mount exhaust only 5k miles couple normal scratches never been down. $500
Sargent seat $175 (pending sale)
Rear sets $100
HCR 1/6 turn throttle $50
front fairings, (trimmed for dirt bars) have a few cracks, no pictures but I can get some in a couple days $100
Black belly fairing $80
CBR1000RR coil over kit, coil over cap and wiring $50
radiators $75
Fan $50
Coolant hoses $40
Brand new in the package T-Rex frame sliders. $75
Protaper dirt bars deegan bend and home made risers $100
lots of other parts, just post with what you might want and ill see if I have it. I do not want to take covers or anything off the engine as of yet. would like to sell it complete.
DMr F4 converted shock 220lbs rider $350 (pending sale)
DMr forks race revalve and springs 220lbs rider (needs seals) $300 (pending sale)
954 front end minus brake master and calipers $450
Engine runs great always maintained $500
Triple clamps $75
Fuel tank $150
Brembo clutch master from ducati $100
Factory front brake master $50
Rear brake master $50
Factory front calipers $50
Factory front rotors $50
Rear brake caliper $30
Rear rotor $30
Braided front brake lines $30
Braided clutch line $30
Front wheel Black $50
Rear wheel Black $50
Swing arm $100
Frame with clean title $500
Carbs just cleaned (factory) $100
Carbs needs cleaning (dyno jet) $100
GPR high mount exhaust only 5k miles couple normal scratches never been down. $500
Sargent seat $175 (pending sale)
Rear sets $100
HCR 1/6 turn throttle $50
front fairings, (trimmed for dirt bars) have a few cracks, no pictures but I can get some in a couple days $100
Black belly fairing $80
CBR1000RR coil over kit, coil over cap and wiring $50
radiators $75
Fan $50
Coolant hoses $40
Brand new in the package T-Rex frame sliders. $75
Protaper dirt bars deegan bend and home made risers $100
lots of other parts, just post with what you might want and ill see if I have it. I do not want to take covers or anything off the engine as of yet. would like to sell it complete.
Last edited by sailorjerry; 01-23-2017 at 02:28 PM.
02-06-2017, 11:58 AM
#4
Junior Member
Squid
Join Date: Apr 2015
Location: Villa Park, IL
Posts: 6
It's just a stupid thing but I am looking for the structure that the tail light mounts to. Mine broke for some reason. I can point it out in a schematic if necessary but I haven't taken anything apart yet to see so I don't know how elaborate it is yet.
Thread
Thread Starter
Forum
Replies
Last Post
